Intumastic Soft Joint

Intumastic Soft Joint

Intumastic Soft Joint

Fast fit flexible fire seal

Insulation-240mins Integrity-240mins Movement-30%

Description

Intumastic Soft Joint is supplied as a two part system (slab and coating).

Intumastic Soft Joint is applied on a strand and binder orientated rock fibre compressible slab, utilising a modified polymeric ablative coating to provide a fire and smoke seal.

Benefits

  • œFully tested at Exova BM TRADA up to 4 hours integrity and insulation

Firetherm Certifire logoASFP_Logo

Intuspan

Intuspan

Intuspan

Joint filler providing a high level of movement

Insulation-120mins Integrity-120mins

Description

Intuspan is a very pliable joint filler, black in colour and factory applied with a revolutionary 102 times volume expansion intumescent compound.

A sandwich of intumescent board, consisting of a modified rubber base filled with graphite and combustion modified foam. Provides a high level of movement suitable for gaps up to 100 mm. Provides 2 hour protection. No adhesive required.

Benefits

  • œCan accommodate regular cycles of high or low amplitude movement
  • œUnaffected by moisture
  • œEasy to install using finger pressure even in uneven gaps
  • œA dry system
  • œFor vertical or horizontal wall applications

Firetherm Certifire logoASFP_Logo

FB770 Intudeck

FB770 Intudeck

FB770 Intudeck

Mineral wool floor slab

Insulation-90mins Integrity-90mins Optifire-traceable

Description

FB770 Intudeck is a rock mineral fibre coated on one side with a smoke and fire resistant sealant. Light weight and quick to install, FB770 can be cut to suit on site and fitted using compression and FS702 Intumastic bonding between joists. 

Ideal where decorative ceilings cannot be disturbed due to lower floor occupancy. FB770 Intudeck may be used to upgrade the compartment capability to 90 minutes fire Integrity and Insulation (EI 90) whilst maintaining the load capacity of the floor. 

FB770 is often used above ornate lathe and plaster ceilings within heritage homes but is also suitable for use in small unites such as flats above shopping facilities or multi-occupancy building conversions/ 

In conjunction with other Nullifire products, FB770 Intudeck is service receiving and can accomodate both combustible and non combustible services. Please consult CPG UK Technical Services for further details.  

Benefits

  • Tested to BS EN 1365-2 (loaded floors) and to BS 476 Pts 20-22 (non-loaded floors) : up to EI 90 
  • Simple installation method 
  • Does not disturb ceilings or damage ornate coving 
  • 42 dB acoustic performance 
  • Optifire TM unique traceability identifier 
  • No additional support required 
  • Lightweight product

Firetherm Certifire logoASFP_Logo

Intubatt 3

Intubatt 3

Intubatt 3

Fast fit flexible fire seal

Insulation-120mins Integrity-240mins Optifire-traceable

Description

Intubatt 3 is supplied pre-configured, ablative coated on a single side and factory cured, Intubatt 3 is a strand and binder orientated rock fibre compressible slab, utilising a modified polymeric ablative coating to provide a fire and smoke seal. Intubatt 3 has a 7.5% overall movement capability.

Benefits

  • œLow cost and simple install
  • œFully tested at Exova BM TRADA up to 4 hours integrity
  • œEasy to cut
  • œFully identifiable using Optifire
  • œNext day delivery available
  • œService capable

Firetherm Certifire logoASFP_Logo

Spanatherm

Spanatherm

Spanatherm

Firestopping for slab edge and curtain walling, for static or movement joints

Insulation-90mins Integrity-120mins

Spanatherm is a strong pre-engineered rock fibre movement-joint fire seal, that allows significant movement accommodation at the same time as providing fire integrity, insulation and an effective smoke seal.

Spanatherm is a dense, fibrous lamella system faced on both sides with foil to provide Class O surface spread of flame and a vapour check barrier.

Benefits

  • Most economic overall system
  • Up to 2 hours fire protection
  • Economic fixings
  • Vapour barrier
  • Smoke barrier
  • Acoustic seal

Firetherm Certifire logoASFP_Logo

Intusil

Intusil

Intusil

Firestopping mastic sealant

Insulation-90minsIntegrity-240mins

Description

Intusil is a modified low modulus silicon that is designed for use in external aggressive environments or in high movement building joints. It has high adhesion and is suitable for high sheen surfaces such as glass and aluminium.

Intusil cannot be readily over-coated.

Benefits

  • œWater resistant seal
  • œUnaffected by moisture
  • œFully tested for up to 240 minutes integrity and insulation
  • œAvailable in easy to handle light weight tubes/foil sausages
  • œCures at a rate of 1 mm per day

Firetherm Certifire logoASFP_Logo