Intumastic Soft Joint

Intumastic Soft Joint

Intumastic Soft Joint

Fast fit flexible fire seal

Insulation-240mins Integrity-240mins Movement-30%

Description

Intumastic Soft Joint is supplied as a two part system (slab and coating).

Intumastic Soft Joint is applied on a strand and binder orientated rock fibre compressible slab, utilising a modified polymeric ablative coating to provide a fire and smoke seal.

Benefits

  • œFully tested at Exova BM TRADA up to 4 hours integrity and insulation

Firetherm Certifire logoASFP_Logo

Intuspan

Intuspan

Intuspan

Joint filler providing a high level of movement

Insulation-120mins Integrity-120mins

Description

Intuspan is a very pliable joint filler, black in colour and factory applied with a revolutionary 102 times volume expansion intumescent compound.

A sandwich of intumescent board, consisting of a modified rubber base filled with graphite and combustion modified foam. Provides a high level of movement suitable for gaps up to 100 mm. Provides 2 hour protection. No adhesive required.

Benefits

  • œCan accommodate regular cycles of high or low amplitude movement
  • œUnaffected by moisture
  • œEasy to install using finger pressure even in uneven gaps
  • œA dry system
  • œFor vertical or horizontal wall applications

Firetherm Certifire logoASFP_Logo

Intubatt 3

Intubatt 3

Intubatt 3

Fast fit flexible fire seal

Insulation-120mins Integrity-240mins Optifire-traceable

Description

Intubatt 3 is supplied pre-configured, ablative coated on a single side and factory cured, Intubatt 3 is a strand and binder orientated rock fibre compressible slab, utilising a modified polymeric ablative coating to provide a fire and smoke seal. Intubatt 3 has a 7.5% overall movement capability.

Benefits

  • œLow cost and simple install
  • œFully tested at Exova BM TRADA up to 4 hours integrity
  • œEasy to cut
  • œFully identifiable using Optifire
  • œNext day delivery available
  • œService capable

Firetherm Certifire logoASFP_Logo

Spanatherm

Spanatherm

Spanatherm

Firestopping for slab edge and curtain walling, for static or movement joints

Insulation-90mins Integrity-120mins

Spanatherm is a strong pre-engineered rock fibre movement-joint fire seal, that allows significant movement accommodation at the same time as providing fire integrity, insulation and an effective smoke seal.

Spanatherm is a dense, fibrous lamella system faced on both sides with foil to provide Class O surface spread of flame and a vapour check barrier.

Benefits

  • Most economic overall system
  • Up to 2 hours fire protection
  • Economic fixings
  • Vapour barrier
  • Smoke barrier
  • Acoustic seal

Firetherm Certifire logoASFP_Logo

Intusil

Intusil

Intusil

Firestopping mastic sealant

Insulation-90minsIntegrity-240mins

Description

Intusil is a modified low modulus silicon that is designed for use in external aggressive environments or in high movement building joints. It has high adhesion and is suitable for high sheen surfaces such as glass and aluminium.

Intusil cannot be readily over-coated.

Benefits

  • œWater resistant seal
  • œUnaffected by moisture
  • œFully tested for up to 240 minutes integrity and insulation
  • œAvailable in easy to handle light weight tubes/foil sausages
  • œCures at a rate of 1 mm per day

Firetherm Certifire logoASFP_Logo

FR230 Intucompound

FR230 Intucompound

FR230 Intucompound

Compound mixed to form fire barrier

Insulation-240minsIntegrity-240minsLoad-capable

Description

FR230 Fire Stopping Compound is a gypsum-based mortar used to reinstate the fire resistance performance of floor constructions where they have been provided with apertures for the penetration of single or multiple services. FR230 provides a safe working platform for loads up to 2.5 kN/m² when installed in full accordance with our recommendations.

FR230 is used to stop the spread of fire and smoke around services that pass-through compartment walls and floors, whilst providing an unsupported load bearing capacity (see Specification Information). The system also provides thermal, acoustic and air sealing performance.

FR230 is suitable for the following service penetrations; single and bunched cables, cable trays, cable ladders, trunking**, non-combustible pipes, ducting/damper penetrations* and combustible pipes**.

Typical areas of use include health and leisure facilities, schools, universities, hotels, commercial, retail, and industrial buildings.

* Damper manufacturer should be consulted prior to application
** A suitable closer device will be required

 

Read more about Intucompound here.

Benefits

  • Provides an effective barrier to the spread of smoke and fire

  • Fire resistance up to 240 minutes

  • Certified to EN 1366-3:2009; ETA 17/0582

  • Rapid setting, zero shrinkage formulation – can be used as pourable or trowel grade

Firetherm Certifire logoASFP_Logo