Intumastic Soft Joint

Intumastic Soft Joint

Intumastic Soft Joint

Fast fit flexible fire seal

Insulation-240mins Integrity-240mins Movement-30%

Description

Intumastic Soft Joint is supplied as a two part system (slab and coating).

Intumastic Soft Joint is applied on a strand and binder orientated rock fibre compressible slab, utilising a modified polymeric ablative coating to provide a fire and smoke seal.

Benefits

  • œFully tested at Exova BM TRADA up to 4 hours integrity and insulation

Firetherm Certifire logoASFP_Logo

Intuspan

Intuspan

Intuspan

Joint filler providing a high level of movement

Insulation-120mins Integrity-120mins

Description

Intuspan is a very pliable joint filler, black in colour and factory applied with a revolutionary 102 times volume expansion intumescent compound.

A sandwich of intumescent board, consisting of a modified rubber base filled with graphite and combustion modified foam. Provides a high level of movement suitable for gaps up to 100 mm. Provides 2 hour protection. No adhesive required.

Benefits

  • œCan accommodate regular cycles of high or low amplitude movement
  • œUnaffected by moisture
  • œEasy to install using finger pressure even in uneven gaps
  • œA dry system
  • œFor vertical or horizontal wall applications

Firetherm Certifire logoASFP_Logo

Intuprofile

Intuprofile

Intuprofile

Designed to fit the trapezoidal spaces in roof and wall cladding profiles

Insulation-120mins Integrity-120mins

Description

Intuprofile sections are factory cut from dense mineral fibre to suit trapezoidal flutes or dovetails and are produced oversized to ensure a snug fit.

Firetherm require either the steel decking manufacturer’s reference or the site-measured dimensions (height, width at top and width at bottom).

Benefits

  • œHighly economic solution
  • œSmoke and fire resistant
  • œHalogen free
  • œExcellent acoustics: 48 dB uncoated, 64 dB coated using 2 mm Intumastic trowel grade or bonding cement

Firetherm Certifire logoASFP_Logo

Intusil

Intusil

Intusil

Firestopping mastic sealant

Insulation-90minsIntegrity-240mins

Description

Intusil is a modified low modulus silicon that is designed for use in external aggressive environments or in high movement building joints. It has high adhesion and is suitable for high sheen surfaces such as glass and aluminium.

Intusil cannot be readily over-coated.

Benefits

  • œWater resistant seal
  • œUnaffected by moisture
  • œFully tested for up to 240 minutes integrity and insulation
  • œAvailable in easy to handle light weight tubes/foil sausages
  • œCures at a rate of 1 mm per day

Firetherm Certifire logoASFP_Logo

FS702 Intumastic

FS702 Intumastic

FS702 Intumastic

Firestopping mastic sealant

Insulation-240minsIntegrity-240minsOptifire-traceable

Description

 

FS702 Intumastic is a water-based acrylic sealant which cures to give a firm but flexible fire seal. Suitable for use in various construction joints offering up to 30% movement capability whilst providing an excellent acoustic and air seal. FS702 is suited for use around non-combustible services, cables, rock fibre insulated non-combustible pipes, using a minimum depth of 25 mm. FS702 has excellent adhesive qualities and can also be used for the bonding and pointing of joints and service penetrations in conjunction with FB750 Intubatt system.

FS702 is suitable for a variety of applications:

  • Static & movement linear joints (masonry/flexible wall to masonry/rigid wall/rigid floor/flexible wall)
  • Window & door joints (masonry to timber/steel)
  • FB750 to flexible wall/rigid wall/rigid floor
  • Cold smoke seal
  • Service penetrations sealing: copper & steel pipes, cable bundles / trays / ladders (with and without FI025 Intuflex Insulation Wrap)
  • FS702 is also suitable for service movement joints (consult Technical Services).

 

Benefits

  • Up to 4 hours fire resistance – Tested to EN 1366-4, EN 1366-3 and BS 476 Pt 20-22
  • 30% movement capability (during fire test)
  • Suitable for flexible walls and rigid walls & floors
  • Used for sealing FB750 Intubatt
  • Acoustics up to 55 dB
  • Air seal up to 2,000 Pa
  • Optifire TM unique traceability identifier

Firetherm Certifire logoASFP_Logo

FB750 Intubatt

FB750 Intubatt

FB750 Intubatt

Batt for use within walls and floors

Insulation-240minsIntegrity-240minsOptifire-traceable

Description

FB750 Intubatt is a lightweight 4 hour fire barrier comprising of a rock mineral fibre board with an uniquely identifiable ablative coating, containing Optifire TM Technology. 

FB750 is designed to reinstate the fire performance of compartment walls and floors which have been breached by penetrating services, providing a fire, smoke, thermal, acoustic and air pressure seal. 

FB750 must be used in conjunction with FS702 Intumastic to be suitable for sealing around the following service types: non-combustible pipes, cable trays, ladders and baskets (perforated or non-perforated), armoured cables, data cables, HV cables, cable bundles up to 100 mm. 

FB750 can be used on flexible walls & rigid walls (100 mm or wider), rigid floors (150 mm or wider), and beneath raised access floors / suspended floors. 

When used with a Nullifire or Firetherm closer device (FS709 Intumastic HP, FP302 Intustrap, FP160 Intusleeve, FP170 Intucollar), FB750 Intubatt also becomes suitable for penetrating combustible pipes & conduits such as PVC, PE, PP, HDPE, PPR, PEX, Uponor and combustible ducting. 

FB750 has also been tested to fire protect the underside of loaded timber floors for up to 120 minutes (BS 476 Pt 21). 

Typical areas of use include: health and leisure facilities, schools, universities, commercial buildings, hospitals, retail and industrial units and nuclear power plants. 

 

 

Benefits

  • Up to 4 hours fire resistance – tested to EN 1366-3 (up to 2.16m2 opening) and to BS 476 Pt 20/22 tested (up to 7.2m2 opening with framework). 
  • Optifire TM unique traceability identifier 
  • Acoustic & smoke sealing 
  • Air pressure tested up to 2000 Pa 
  • Fully tested for up to 240 minutes integrity and insulation
  • Suitable for use in flexible & rigid walls, rigid floors and under timber floors 
  • Easy to cut 
  • Allows for thermal expansion of the services in ambiant conditions

Firetherm Certifire logoASFP_Logo