Firetherm 90

Firetherm 90

Firetherm 90

90 minute fire and smoke barrier in roof voids and large volume areas

Integrity-90mins

Description

Heavy duty non-insulant 470 g/m2 coated glass fibre cloth supported on a steel frame.

Unlike other reinforced mineral fibre solutions, there is very little fibre dust created during installation or during the life of the barrier. Long drops up to 3 m can be achieved without the need of extra support framework. As the system is lightweight it can be fitted to small section structural steel members without the risk of overloading. If in doubt refer the to the project engineer or specifiers.

Benefits

  • œLight weight for easy installation
  • œEasy to handle on rolls of 65 m2 that can be easily carried by one man (roll size 1.3 m x 50 m)
  • œVery low to negligible dust generation
  • œVery fast and simple seam detail using staples and folds
  • œCoated on both sides to provide maximum smoke resistance

Firetherm Certifire logoASFP_Logo

Firetherm 90

Firetherm 30

Firetherm 30

30 minute fire and smoke barrier in roof voids and large volume areas

Integrity-30mins

Description

Heavy duty non-insulant 260 g/m2 coated glass fibre cloth supported on a steel frame.

Unlike other reinforced mineral fibre solutions, there is very little fibre dust created during installation or during the life of the barrier. Long drops up to 3 m can be achieved without the need of extra support framework. As the system is lightweight it can be fitted to small section structural steel members without the risk of overloading. If in doubt refer the to the project engineer or specifiers.

Benefits

  • Light weight for easy installation
  • Easy to handle on rolls of 65 m2 that can be easily carried by one man (roll size 1.3 m x 50 m)
  • Very fast and simple seam detail using staples and folds
  • Coated on both sides to provide maximum smoke resistance

Firetherm Certifire logoASFP_Logo

Intuprofile

Intuprofile

Intuprofile

Designed to fit the trapezoidal spaces in roof and wall cladding profiles

Insulation-120mins Integrity-120mins

Description

Intuprofile sections are factory cut from dense mineral fibre to suit trapezoidal flutes or dovetails and are produced oversized to ensure a snug fit.

Firetherm require either the steel decking manufacturer’s reference or the site-measured dimensions (height, width at top and width at bottom).

Benefits

  • œHighly economic solution
  • œSmoke and fire resistant
  • œHalogen free
  • œExcellent acoustics: 48 dB uncoated, 64 dB coated using 2 mm Intumastic trowel grade or bonding cement

Firetherm Certifire logoASFP_Logo

FB750 Intubatt

FB750 Intubatt

FB750 Intubatt

Batt for use within walls and floors

Insulation-240minsIntegrity-240minsOptifire-traceable

Description

FB750 Intubatt is a lightweight 4 hour fire barrier comprising of a rock mineral fibre board with an uniquely identifiable ablative coating, containing Optifire TM Technology. 

FB750 is designed to reinstate the fire performance of compartment walls and floors which have been breached by penetrating services, providing a fire, smoke, thermal, acoustic and air pressure seal. 

FB750 must be used in conjunction with FS702 Intumastic to be suitable for sealing around the following service types: non-combustible pipes, cable trays, ladders and baskets (perforated or non-perforated), armoured cables, data cables, HV cables, cable bundles up to 100 mm. 

FB750 can be used on flexible walls & rigid walls (100 mm or wider), rigid floors (150 mm or wider), and beneath raised access floors / suspended floors. 

When used with a Nullifire or Firetherm closer device (FS709 Intumastic HP, FP302 Intustrap, FP160 Intusleeve, FP170 Intucollar), FB750 Intubatt also becomes suitable for penetrating combustible pipes & conduits such as PVC, PE, PP, HDPE, PPR, PEX, Uponor and combustible ducting. 

FB750 has also been tested to fire protect the underside of loaded timber floors for up to 120 minutes (BS 476 Pt 21). 

Typical areas of use include: health and leisure facilities, schools, universities, commercial buildings, hospitals, retail and industrial units and nuclear power plants. 

 

 

Benefits

  • Up to 4 hours fire resistance – tested to EN 1366-3 (up to 2.16m2 opening) and to BS 476 Pt 20/22 tested (up to 7.2m2 opening with framework). 
  • Optifire TM unique traceability identifier 
  • Acoustic & smoke sealing 
  • Air pressure tested up to 2000 Pa 
  • Fully tested for up to 240 minutes integrity and insulation
  • Suitable for use in flexible & rigid walls, rigid floors and under timber floors 
  • Easy to cut 
  • Allows for thermal expansion of the services in ambiant conditions

Firetherm Certifire logoASFP_Logo