Intupillow Pro

Intupillow Pro

Intupillow Pro

Intumescent pillows for trunking boxes where frequent changes to cabling may be required

Insulation-120mins Integrity-120mins

Description

Firetherm Intupillow Pro is a Class 1 rated glass cloth covered bags containing a mixture of inorganic fibres and intumescent material, produced in three sizes. In a fire, the filler expands and hardens providing a fire-tight and mechanically strong barrier.

Benefits

  • œIntegrity, insulation and smoke seal
  • œZero fibre migration
  • œThree  standard sizes to allow for complicated service conditions
  • œOther sizes made to order

Firetherm Certifire logoASFP_Logo

Intumastic Soft Joint

Intumastic Soft Joint

Intumastic Soft Joint

Fast fit flexible fire seal

Insulation-240mins Integrity-240mins Movement-30%

Description

Intumastic Soft Joint is supplied as a two part system (slab and coating).

Intumastic Soft Joint is applied on a strand and binder orientated rock fibre compressible slab, utilising a modified polymeric ablative coating to provide a fire and smoke seal.

Benefits

  • œFully tested at Exova BM TRADA up to 4 hours integrity and insulation

Firetherm Certifire logoASFP_Logo

Electro Pad

Electro Pad

Electro Pad

Fire protection within electrical socket boxes in fire compartment walls

Insulation-120mins Integrity-120mins

Description

A pressure exerting graphite manipulated extruded rubber pad. Electropad is simply bonded into position at the rear of the socket box, only reacting in the event of a fire.

Benefits

  • œUp to 2 hours fire protection
  • œAcoustic sealing
  • œChoice of installation methods
  • œSimple to install
  • œSuitable for most dry wall applications

Firetherm Certifire logoASFP_Logo

FI025 Intuflex 45/90

FI025 Intuflex 45/90

FI025 Intuflex 45/90

To reinstate the insulation requirement where services penetrate a compartment wall or floor

Insulation-120mins

Description

FI025 Intuflex is a fire insulation upgrade material, primarily made from rock mineral fibre, with an outer layer of foil to provide a class 0 surface spread of flame around a class A1 core. The foil facing in conjunction with aluminium foil finishing tape, leaves an aesthetically pleasing finish with zero fibre migration. 

FI025 Intuflex is designed to upgrade the insulation rating or uninsulated penetrated services (where required) which have been sealed using a Nullifire or Firetherm product. The application of FI025 around most services increases the “I” rating to that required by the compartment line. 

FI025 has been tested around copper and steel pipes up to 160 mm diameter, cable trays, ladders and baskets, individual cables and cable bundles up to 100 mm diameter. 

 

Benefits

  • Reinstates the insulation requirements of the compartment when applied around uninsulated service penetrations 
  • Tested to EN 1366-3 with copper pipes, steel pipes, cable trays/ladders/baskets, individual cables and cable bundles 
  • Easy & fast installation 
  • Lightweight 
  • Does not de-rate electrical cables 

Firetherm Certifire logoASFP_Logo

FF197 Gun Grade Fire Rated PU Foam

FF197 Gun Grade Fire Rated PU Foam

FF197 Gun Grade Fire Rated PU Foam 

Modified, single component, fire rated polyurethane foam

Insulation-240mins Integrity-240mins

Description

FF197 is a modified, single component, fire rated polyurethane foam. 

FF197 is used to seal door frames, window frames and linear gaps throughout the fire rated areas of a building. 

 

Benefits

  • Tested to BS EN 1643-1 (fire door) : FD60 performance achieved
  • Gaps up to 35 mm (fire door) 
  • Tested without architrave (fire door) 
  • Tested with plastic packers (fire door) 
  • Tested to BS EN 1366-4 (linear gaps) : up to 4 hours fire resistance 
  • Pink coloured foam for easy identification 
  • Tack free in 10 minutes 
  • 2-in-1 gun & nozzle canister 

Firetherm Certifire logoASFP_Logo

Intumastic Trowel/Brush

Intumastic Trowel/Brush

Intumastic Trowel/Brush

Used to coat mineral fibre insulation batts already in-situ

Description

Trowel-grade or brush grade, medium viscosity paste, or low viscosity liquid containing acrylic emulsion, inert fillers and fungicide.

To be used for internal applications only.

Benefits

  • œUp to 4 hrs fire integrity to BS 476 Pt 20, BS EN 1366/3-4 depending on specification

Firetherm Certifire logoASFP_Logo