Intupillow Pro

Intupillow Pro

Intupillow Pro

Intumescent pillows for trunking boxes where frequent changes to cabling may be required

Insulation-120mins Integrity-120mins

Description

Firetherm Intupillow Pro is a Class 1 rated glass cloth covered bags containing a mixture of inorganic fibres and intumescent material, produced in three sizes. In a fire, the filler expands and hardens providing a fire-tight and mechanically strong barrier.

Benefits

  • œIntegrity, insulation and smoke seal
  • œZero fibre migration
  • œThree  standard sizes to allow for complicated service conditions
  • œOther sizes made to order

Firetherm Certifire logoASFP_Logo

FI025 Intuflex 45/90

FI025 Intuflex 45/90

FI025 Intuflex 45/90

To reinstate the insulation requirement where services penetrate a compartment wall or floor

Insulation-120mins

Description

FI025 Intuflex is a fire insulation upgrade material, primarily made from rock mineral fibre, with an outer layer of foil to provide a class 0 surface spread of flame around a class A1 core. The foil facing in conjunction with aluminium foil finishing tape, leaves an aesthetically pleasing finish with zero fibre migration. 

FI025 Intuflex is designed to upgrade the insulation rating or uninsulated penetrated services (where required) which have been sealed using a Nullifire or Firetherm product. The application of FI025 around most services increases the “I” rating to that required by the compartment line. 

FI025 has been tested around copper and steel pipes up to 160 mm diameter, cable trays, ladders and baskets, individual cables and cable bundles up to 100 mm diameter. 

 

Benefits

  • Reinstates the insulation requirements of the compartment when applied around uninsulated service penetrations 
  • Tested to EN 1366-3 with copper pipes, steel pipes, cable trays/ladders/baskets, individual cables and cable bundles 
  • Easy & fast installation 
  • Lightweight 
  • Does not de-rate electrical cables 

Firetherm Certifire logoASFP_Logo

FP160 Intusleeve

FP160 Intusleeve

FP160 Intusleeve Cable

Intumescent closer for cable penetrations

Insulation-120mins Integrity-240mins

Description

FP160 Intusleeve is a steel enclosed closer device for combustible pipes of up to 200 mm. Available in various lengths, it is the perfect solution for angled pipes. FP160 Intusleeve provides service integrity of up to 4 hours, dependent on substrate. It may be used directly in solid or flexible substrates, or within FB750 Intubatt. Additional clips may be required in floor slabs. 

Used to seal combustible pipes as they pass through fire compartment walls and floors. When exposed to fire, the intumescent lining within the metal sleeve expands and fills the space left by the heat softened pipe thus reinstating the fire compartment line. 

The product is suitable for retrofit or maybe installed prior to service installation. When used as a multi-box or cable closer, foam smoke seals should be requested. 

 

Benefits

  • Ultra-slim body design ensures easy installation in awkward situations – reduces time on site. 
  • Fully tested at Exova BM TRADA to 2 hours integrity and Insulation in walls
  • Less obtrusive than externally fitted fire collars – better aesthetics 
  • Tested to 2 hours integrity and insulation walls and 4 hours integrity and insulation when used within FR230 Intucompound fire resistance floor seals

Firetherm Certifire logoASFP_Logo

FS709 Intumastic HP

FS709 Intumastic HP

FS709 Intumastic HP

Intumescent acrylic fire barrier

Insulation-240mins Integrity-240mins

Description

FS709 Intumastic HP is a high expansion/pressure exerting, graphite intumescent sealant. FS709 Intumastic HP expands when exposed to fire, reinstating the fire performance of compartment walls and floors which have been penetrated with services. FS709 can be used on flexible walls & rigid walls (100 mm or wider), rigid floors (150 mm or wider), and also with FB750 Intubatt. 

FS709 Intumastic HP is designed to close off gaps and penetrations in compartment walls and floors, to provide up to 4 hours fire resistance . This product has been formulated to close off combustible pipe penetrations in the event of a fire, negating the need for pipe closers or wrap systems. FS709 Intumastic HP has been tested with the following service penetrations: 

  • Combustible pipes up to 125 mm (ABS, PE, PP, HDPE, PVC, PEX…) 
  • Insulated non-combustible pipes up to 160 mm; pipe insulation types: nytrile, rubber, glass fibre, rock fibre up to 60 mm insulation wall thickness. 
  • Individual or groups of cables, perforated & non-perforated cable trays, cable ladders, cable baskets (up to 500 mm), cable bundles (up to 100 mm)

For use in dry internal conditions only. For other conditions, such as high humidity, contact CPG UK Technical Services. 

 

Benefits

  • Up to 4 hours fire resistance – Tested to EN 1366-3 and EN 1366-4
  • Versatile & easy to apply 
  • Can be used with FB750 Intubatt 
  • For use in both walls and floor
  • Tested with combustible pipes up to 125 mm, insulated non-combustible pipes up to 160 mm, cables, cable trays/ladders/baskets (up to 500 mm), cable bundles (up to 100 mm)
  • Tested in openings up to 600 x 600 mm 
  • Tested for use in linear gaps up to 25 mm 

Firetherm Certifire logoASFP_Logo

FR230 Intucompound

FR230 Intucompound

FR230 Intucompound

Compound mixed to form fire barrier

Insulation-240minsIntegrity-240minsLoad-capable

Description

FR230 Fire Stopping Compound is a gypsum-based mortar used to reinstate the fire resistance performance of floor constructions where they have been provided with apertures for the penetration of single or multiple services. FR230 provides a safe working platform for loads up to 2.5 kN/m² when installed in full accordance with our recommendations.

FR230 is used to stop the spread of fire and smoke around services that pass-through compartment walls and floors, whilst providing an unsupported load bearing capacity (see Specification Information). The system also provides thermal, acoustic and air sealing performance.

FR230 is suitable for the following service penetrations; single and bunched cables, cable trays, cable ladders, trunking**, non-combustible pipes, ducting/damper penetrations* and combustible pipes**.

Typical areas of use include health and leisure facilities, schools, universities, hotels, commercial, retail, and industrial buildings.

* Damper manufacturer should be consulted prior to application
** A suitable closer device will be required

 

Read more about Intucompound here.

Benefits

  • Provides an effective barrier to the spread of smoke and fire

  • Fire resistance up to 240 minutes

  • Certified to EN 1366-3:2009; ETA 17/0582

  • Rapid setting, zero shrinkage formulation – can be used as pourable or trowel grade

Firetherm Certifire logoASFP_Logo

FS702 Intumastic

FS702 Intumastic

FS702 Intumastic

Firestopping mastic sealant

Insulation-240minsIntegrity-240minsOptifire-traceable

Description

 

FS702 Intumastic is a water-based acrylic sealant which cures to give a firm but flexible fire seal. Suitable for use in various construction joints offering up to 30% movement capability whilst providing an excellent acoustic and air seal. FS702 is suited for use around non-combustible services, cables, rock fibre insulated non-combustible pipes, using a minimum depth of 25 mm. FS702 has excellent adhesive qualities and can also be used for the bonding and pointing of joints and service penetrations in conjunction with FB750 Intubatt system.

FS702 is suitable for a variety of applications:

  • Static & movement linear joints (masonry/flexible wall to masonry/rigid wall/rigid floor/flexible wall)
  • Window & door joints (masonry to timber/steel)
  • FB750 to flexible wall/rigid wall/rigid floor
  • Cold smoke seal
  • Service penetrations sealing: copper & steel pipes, cable bundles / trays / ladders (with and without FI025 Intuflex Insulation Wrap)
  • FS702 is also suitable for service movement joints (consult Technical Services).

 

Benefits

  • Up to 4 hours fire resistance – Tested to EN 1366-4, EN 1366-3 and BS 476 Pt 20-22
  • 30% movement capability (during fire test)
  • Suitable for flexible walls and rigid walls & floors
  • Used for sealing FB750 Intubatt
  • Acoustics up to 55 dB
  • Air seal up to 2,000 Pa
  • Optifire TM unique traceability identifier

Firetherm Certifire logoASFP_Logo