FP170 Intucollar

FP170 Intucollar

FP170 Intucollar

Collar for sealing plastic pipes

Insulation-240mins Integrity-240mins

Description

FP170 Intucollar comprises of a stainless steel shell and a reactive intumescent lining. FP170 expands when exposed to fire, reinstating the fire performance of compartment walls and floors which have been penetrated by combustible pipes. FP170 Intucollar can be used on flexible walls & rigid walls (100 mm or wider) and rigid floors (150 mm or wider). 

FP170 Intucollar has been tested with combustible pipes (PVC, PE, PP, SanPVC, Bevec etc.), insulated non-combustible pipes (steel) and network cable bundles (up to 125 mm). 

Typically testing is carried out using (U/U) configuration for maximum coverage to many types of combustible pipe material. 

 

Benefits

  • Up to 4 hours fire resistance – Tested to EN 1366-3 and EN 1366-4 
  • Suitable for use with a wide range of plastic, metal and insulated pipes
  • Can be used for applications in walls and floors
  • Simple to use, one-piece design saves time on site
  • Water resistant
  • Non-corrosive: inert product
  • Easy to install 

Firetherm Certifire logoASFP_Logo

Intusleeve Duct

Intusleeve Duct

Intusleeve Duct

For fire sealing ducting penetrations

Insulation-120minsIntegrity-120mins

Description

A 140 to 300 mm (dependent on requirement) deep steel sleeve that is positioned around the ductwork. The device is pre-lined with a high expansion intumescent and is designed specifically to provide a low cost solution for fire sealing combustible ducting penetrations whilst completely protecting the cavity within stud work walls. The device can be retro-fitted to existing ducting.

Benefits

  • œUltra-slim body design ensures easy installation in awkward situations
  • œFully tested at BM TRADA to 2 hours integrity and Insulation walls

Firetherm Certifire logoASFP_Logo

Intusleeve

Intusleeve

Intusleeve

Intumescent closer device

Insulation-240minsIntegrity-240mins

Description

A 140 to 300mm (dependent on requirement) deep steel sleeve that is positioned around combustible pipes, to provide up to 4 hours fire protection. Designed specifically to provide a low cost solution for fire sealing combustible pipe penetrations whilst completely protecting the cavity within stud work walls.

Intusleeve is a perfect solution for angled pipes.

Benefits

  • œUltra-slim body design ensures easy installation in awkward situations and less obtrusive than externally fitted fire collars
  • œFully tested at Exova BM TRADA to 2 hours integrity and insulation walls. 4 hours integrity and insulation when used within Intucompound floor seals

Firetherm Certifire logoASFP_Logo

Intustrap-Intuband

Intustrap-Intuband

Intustrap/Intuband

High pressure expansion strip

Insulation-240minsIntegrity-240mins

Description

Intustrap is a ruberoid strip with high flexibility and is most commonly used around all types of pipe Insulation up to 50 mm thick or combustible pipes with a diameter of between 20 mm and 160 mm.

Intustrap may also be used around conduits, cables (if required), and to close ventilated air spaces.

Intubands are pre-configured pipe wraps to suit proprietary pipe size.

Benefits

  • œUnaffected by moisture
  • œFully tested for up to 240 minutes integrity and insulation (dependent on application)
  • œAvailable in easy to handle rolls or pre-configured bands to suit pipe size
  • œSimply link with duct tape

Firetherm Certifire logoASFP_Logo

FS709 Intumastic HP

FS709 Intumastic HP

FS709 Intumastic HP

Intumescent acrylic fire barrier

Insulation-240mins Integrity-240mins

Description

FS709 Intumastic HP is a high expansion/pressure exerting, graphite intumescent sealant. FS709 Intumastic HP expands when exposed to fire, reinstating the fire performance of compartment walls and floors which have been penetrated with services. FS709 can be used on flexible walls & rigid walls (100 mm or wider), rigid floors (150 mm or wider), and also with FB750 Intubatt. 

FS709 Intumastic HP is designed to close off gaps and penetrations in compartment walls and floors, to provide up to 4 hours fire resistance . This product has been formulated to close off combustible pipe penetrations in the event of a fire, negating the need for pipe closers or wrap systems. FS709 Intumastic HP has been tested with the following service penetrations: 

  • Combustible pipes up to 125 mm (ABS, PE, PP, HDPE, PVC, PEX…) 
  • Insulated non-combustible pipes up to 160 mm; pipe insulation types: nytrile, rubber, glass fibre, rock fibre up to 60 mm insulation wall thickness. 
  • Individual or groups of cables, perforated & non-perforated cable trays, cable ladders, cable baskets (up to 500 mm), cable bundles (up to 100 mm)

For use in dry internal conditions only. For other conditions, such as high humidity, contact CPG UK Technical Services. 

 

Benefits

  • Up to 4 hours fire resistance – Tested to EN 1366-3 and EN 1366-4
  • Versatile & easy to apply 
  • Can be used with FB750 Intubatt 
  • For use in both walls and floor
  • Tested with combustible pipes up to 125 mm, insulated non-combustible pipes up to 160 mm, cables, cable trays/ladders/baskets (up to 500 mm), cable bundles (up to 100 mm)
  • Tested in openings up to 600 x 600 mm 
  • Tested for use in linear gaps up to 25 mm 

Firetherm Certifire logoASFP_Logo

FB750 Intubatt

FB750 Intubatt

FB750 Intubatt

Batt for use within walls and floors

Insulation-240minsIntegrity-240minsOptifire-traceable

Description

FB750 Intubatt is a lightweight 4 hour fire barrier comprising of a rock mineral fibre board with an uniquely identifiable ablative coating, containing Optifire TM Technology. 

FB750 is designed to reinstate the fire performance of compartment walls and floors which have been breached by penetrating services, providing a fire, smoke, thermal, acoustic and air pressure seal. 

FB750 must be used in conjunction with FS702 Intumastic to be suitable for sealing around the following service types: non-combustible pipes, cable trays, ladders and baskets (perforated or non-perforated), armoured cables, data cables, HV cables, cable bundles up to 100 mm. 

FB750 can be used on flexible walls & rigid walls (100 mm or wider), rigid floors (150 mm or wider), and beneath raised access floors / suspended floors. 

When used with a Nullifire or Firetherm closer device (FS709 Intumastic HP, FP302 Intustrap, FP160 Intusleeve, FP170 Intucollar), FB750 Intubatt also becomes suitable for penetrating combustible pipes & conduits such as PVC, PE, PP, HDPE, PPR, PEX, Uponor and combustible ducting. 

FB750 has also been tested to fire protect the underside of loaded timber floors for up to 120 minutes (BS 476 Pt 21). 

Typical areas of use include: health and leisure facilities, schools, universities, commercial buildings, hospitals, retail and industrial units and nuclear power plants. 

 

 

Benefits

  • Up to 4 hours fire resistance – tested to EN 1366-3 (up to 2.16m2 opening) and to BS 476 Pt 20/22 tested (up to 7.2m2 opening with framework). 
  • Optifire TM unique traceability identifier 
  • Acoustic & smoke sealing 
  • Air pressure tested up to 2000 Pa 
  • Fully tested for up to 240 minutes integrity and insulation
  • Suitable for use in flexible & rigid walls, rigid floors and under timber floors 
  • Easy to cut 
  • Allows for thermal expansion of the services in ambiant conditions

Firetherm Certifire logoASFP_Logo