Intusleeve

Intusleeve

Intusleeve

Intumescent closer device

Insulation-240minsIntegrity-240mins

Description

A 140 to 300mm (dependent on requirement) deep steel sleeve that is positioned around combustible pipes, to provide up to 4 hours fire protection. Designed specifically to provide a low cost solution for fire sealing combustible pipe penetrations whilst completely protecting the cavity within stud work walls.

Intusleeve is a perfect solution for angled pipes.

Benefits

  • œUltra-slim body design ensures easy installation in awkward situations and less obtrusive than externally fitted fire collars
  • œFully tested at Exova BM TRADA to 2 hours integrity and insulation walls. 4 hours integrity and insulation when used within Intucompound floor seals

Firetherm Certifire logoASFP_Logo

Intustrap-Intuband

Intustrap-Intuband

Intustrap/Intuband

High pressure expansion strip

Insulation-240minsIntegrity-240mins

Description

Intustrap is a ruberoid strip with high flexibility and is most commonly used around all types of pipe Insulation up to 50 mm thick or combustible pipes with a diameter of between 20 mm and 160 mm.

Intustrap may also be used around conduits, cables (if required), and to close ventilated air spaces.

Intubands are pre-configured pipe wraps to suit proprietary pipe size.

Benefits

  • œUnaffected by moisture
  • œFully tested for up to 240 minutes integrity and insulation (dependent on application)
  • œAvailable in easy to handle rolls or pre-configured bands to suit pipe size
  • œSimply link with duct tape

Firetherm Certifire logoASFP_Logo

FS709 Intumastic HP

FS709 Intumastic HP

FS709 Intumastic HP

Intumescent acrylic fire barrier

Insulation-240mins Integrity-240mins

Description

FS709 Intumastic HP is a high expansion/pressure exerting, graphite intumescent sealant. FS709 Intumastic HP expands when exposed to fire, reinstating the fire performance of compartment walls and floors which have been penetrated with services. FS709 can be used on flexible walls & rigid walls (100 mm or wider), rigid floors (150 mm or wider), and also with FB750 Intubatt. 

FS709 Intumastic HP is designed to close off gaps and penetrations in compartment walls and floors, to provide up to 4 hours fire resistance . This product has been formulated to close off combustible pipe penetrations in the event of a fire, negating the need for pipe closers or wrap systems. FS709 Intumastic HP has been tested with the following service penetrations: 

  • Combustible pipes up to 125 mm (ABS, PE, PP, HDPE, PVC, PEX…) 
  • Insulated non-combustible pipes up to 160 mm; pipe insulation types: nytrile, rubber, glass fibre, rock fibre up to 60 mm insulation wall thickness. 
  • Individual or groups of cables, perforated & non-perforated cable trays, cable ladders, cable baskets (up to 500 mm), cable bundles (up to 100 mm)

For use in dry internal conditions only. For other conditions, such as high humidity, contact CPG UK Technical Services. 

 

Benefits

  • Up to 4 hours fire resistance – Tested to EN 1366-3 and EN 1366-4
  • Versatile & easy to apply 
  • Can be used with FB750 Intubatt 
  • For use in both walls and floor
  • Tested with combustible pipes up to 125 mm, insulated non-combustible pipes up to 160 mm, cables, cable trays/ladders/baskets (up to 500 mm), cable bundles (up to 100 mm)
  • Tested in openings up to 600 x 600 mm 
  • Tested for use in linear gaps up to 25 mm 

Firetherm Certifire logoASFP_Logo