Intumastic Soft Joint

Intumastic Soft Joint

Intumastic Soft Joint

Fast fit flexible fire seal

Insulation-240mins Integrity-240mins Movement-30%

Description

Intumastic Soft Joint is supplied as a two part system (slab and coating).

Intumastic Soft Joint is applied on a strand and binder orientated rock fibre compressible slab, utilising a modified polymeric ablative coating to provide a fire and smoke seal.

Benefits

  • œFully tested at Exova BM TRADA up to 4 hours integrity and insulation

Firetherm Certifire logoASFP_Logo

FF197 Gun Grade Fire Rated PU Foam

FF197 Gun Grade Fire Rated PU Foam

FF197 Gun Grade Fire Rated PU Foam 

Modified, single component, fire rated polyurethane foam

Insulation-240mins Integrity-240mins

Description

FF197 is a modified, single component, fire rated polyurethane foam. 

FF197 is used to seal door frames, window frames and linear gaps throughout the fire rated areas of a building. 

 

Benefits

  • Tested to BS EN 1643-1 (fire door) : FD60 performance achieved
  • Gaps up to 35 mm (fire door) 
  • Tested without architrave (fire door) 
  • Tested with plastic packers (fire door) 
  • Tested to BS EN 1366-4 (linear gaps) : up to 4 hours fire resistance 
  • Pink coloured foam for easy identification 
  • Tack free in 10 minutes 
  • 2-in-1 gun & nozzle canister 

Firetherm Certifire logoASFP_Logo

Intuspan

Intuspan

Intuspan

Joint filler providing a high level of movement

Insulation-120mins Integrity-120mins

Description

Intuspan is a very pliable joint filler, black in colour and factory applied with a revolutionary 102 times volume expansion intumescent compound.

A sandwich of intumescent board, consisting of a modified rubber base filled with graphite and combustion modified foam. Provides a high level of movement suitable for gaps up to 100 mm. Provides 2 hour protection. No adhesive required.

Benefits

  • œCan accommodate regular cycles of high or low amplitude movement
  • œUnaffected by moisture
  • œEasy to install using finger pressure even in uneven gaps
  • œA dry system
  • œFor vertical or horizontal wall applications

Firetherm Certifire logoASFP_Logo

Intubatt 3

Intubatt 3

Intubatt 3

Fast fit flexible fire seal

Insulation-120mins Integrity-240mins Optifire-traceable

Description

Intubatt 3 is supplied pre-configured, ablative coated on a single side and factory cured, Intubatt 3 is a strand and binder orientated rock fibre compressible slab, utilising a modified polymeric ablative coating to provide a fire and smoke seal. Intubatt 3 has a 7.5% overall movement capability.

Benefits

  • œLow cost and simple install
  • œFully tested at Exova BM TRADA up to 4 hours integrity
  • œEasy to cut
  • œFully identifiable using Optifire
  • œNext day delivery available
  • œService capable

Firetherm Certifire logoASFP_Logo

Intusil

Intusil

Intusil

Firestopping mastic sealant

Insulation-90minsIntegrity-240mins

Description

Intusil is a modified low modulus silicon that is designed for use in external aggressive environments or in high movement building joints. It has high adhesion and is suitable for high sheen surfaces such as glass and aluminium.

Intusil cannot be readily over-coated.

Benefits

  • œWater resistant seal
  • œUnaffected by moisture
  • œFully tested for up to 240 minutes integrity and insulation
  • œAvailable in easy to handle light weight tubes/foil sausages
  • œCures at a rate of 1 mm per day

Firetherm Certifire logoASFP_Logo

FS702 Intumastic

FS702 Intumastic

FS702 Intumastic

Firestopping mastic sealant

Insulation-240minsIntegrity-240minsOptifire-traceable

Description

 

FS702 Intumastic is a water-based acrylic sealant which cures to give a firm but flexible fire seal. Suitable for use in various construction joints offering up to 30% movement capability whilst providing an excellent acoustic and air seal. FS702 is suited for use around non-combustible services, cables, rock fibre insulated non-combustible pipes, using a minimum depth of 25 mm. FS702 has excellent adhesive qualities and can also be used for the bonding and pointing of joints and service penetrations in conjunction with FB750 Intubatt system.

FS702 is suitable for a variety of applications:

  • Static & movement linear joints (masonry/flexible wall to masonry/rigid wall/rigid floor/flexible wall)
  • Window & door joints (masonry to timber/steel)
  • FB750 to flexible wall/rigid wall/rigid floor
  • Cold smoke seal
  • Service penetrations sealing: copper & steel pipes, cable bundles / trays / ladders (with and without FI025 Intuflex Insulation Wrap)
  • FS702 is also suitable for service movement joints (consult Technical Services).

 

Benefits

  • Up to 4 hours fire resistance – Tested to EN 1366-4, EN 1366-3 and BS 476 Pt 20-22
  • 30% movement capability (during fire test)
  • Suitable for flexible walls and rigid walls & floors
  • Used for sealing FB750 Intubatt
  • Acoustics up to 55 dB
  • Air seal up to 2,000 Pa
  • Optifire TM unique traceability identifier

Firetherm Certifire logoASFP_Logo