Intumastic Soft Joint

Intumastic Soft Joint

Intumastic Soft Joint

Fast fit flexible fire seal

Insulation-240mins Integrity-240mins Movement-30%

Description

Intumastic Soft Joint is supplied as a two part system (slab and coating).

Intumastic Soft Joint is applied on a strand and binder orientated rock fibre compressible slab, utilising a modified polymeric ablative coating to provide a fire and smoke seal.

Benefits

  • œFully tested at Exova BM TRADA up to 4 hours integrity and insulation

Firetherm Certifire logoASFP_Logo

FI025 Intuflex 45/90

FI025 Intuflex 45/90

FI025 Intuflex 45/90

To reinstate the insulation requirement where services penetrate a compartment wall or floor

Insulation-120mins

Description

FI025 Intuflex is a fire insulation upgrade material, primarily made from rock mineral fibre, with an outer layer of foil to provide a class 0 surface spread of flame around a class A1 core. The foil facing in conjunction with aluminium foil finishing tape, leaves an aesthetically pleasing finish with zero fibre migration. 

FI025 Intuflex is designed to upgrade the insulation rating or uninsulated penetrated services (where required) which have been sealed using a Nullifire or Firetherm product. The application of FI025 around most services increases the “I” rating to that required by the compartment line. 

FI025 has been tested around copper and steel pipes up to 160 mm diameter, cable trays, ladders and baskets, individual cables and cable bundles up to 100 mm diameter. 

 

Benefits

  • Reinstates the insulation requirements of the compartment when applied around uninsulated service penetrations 
  • Tested to EN 1366-3 with copper pipes, steel pipes, cable trays/ladders/baskets, individual cables and cable bundles 
  • Easy & fast installation 
  • Lightweight 
  • Does not de-rate electrical cables 

Firetherm Certifire logoASFP_Logo

Intumastic Trowel/Brush

Intumastic Trowel/Brush

Intumastic Trowel/Brush

Used to coat mineral fibre insulation batts already in-situ

Description

Trowel-grade or brush grade, medium viscosity paste, or low viscosity liquid containing acrylic emulsion, inert fillers and fungicide.

To be used for internal applications only.

Benefits

  • œUp to 4 hrs fire integrity to BS 476 Pt 20, BS EN 1366/3-4 depending on specification

Firetherm Certifire logoASFP_Logo

FB750 Intubatt

FB750 Intubatt

FB750 Intubatt

Batt for use within walls and floors

Insulation-240minsIntegrity-240minsOptifire-traceable

Description

FB750 Intubatt is a lightweight 4 hour fire barrier comprising of a rock mineral fibre board with an uniquely identifiable ablative coating, containing Optifire TM Technology. 

FB750 is designed to reinstate the fire performance of compartment walls and floors which have been breached by penetrating services, providing a fire, smoke, thermal, acoustic and air pressure seal. 

FB750 must be used in conjunction with FS702 Intumastic to be suitable for sealing around the following service types: non-combustible pipes, cable trays, ladders and baskets (perforated or non-perforated), armoured cables, data cables, HV cables, cable bundles up to 100 mm. 

FB750 can be used on flexible walls & rigid walls (100 mm or wider), rigid floors (150 mm or wider), and beneath raised access floors / suspended floors. 

When used with a Nullifire or Firetherm closer device (FS709 Intumastic HP, FP302 Intustrap, FP160 Intusleeve, FP170 Intucollar), FB750 Intubatt also becomes suitable for penetrating combustible pipes & conduits such as PVC, PE, PP, HDPE, PPR, PEX, Uponor and combustible ducting. 

FB750 has also been tested to fire protect the underside of loaded timber floors for up to 120 minutes (BS 476 Pt 21). 

Typical areas of use include: health and leisure facilities, schools, universities, commercial buildings, hospitals, retail and industrial units and nuclear power plants. 

 

 

Benefits

  • Up to 4 hours fire resistance – tested to EN 1366-3 (up to 2.16m2 opening) and to BS 476 Pt 20/22 tested (up to 7.2m2 opening with framework). 
  • Optifire TM unique traceability identifier 
  • Acoustic & smoke sealing 
  • Air pressure tested up to 2000 Pa 
  • Fully tested for up to 240 minutes integrity and insulation
  • Suitable for use in flexible & rigid walls, rigid floors and under timber floors 
  • Easy to cut 
  • Allows for thermal expansion of the services in ambiant conditions

Firetherm Certifire logoASFP_Logo