Soffit Liner Rock

Soffit Liner Rock

Soffit Liner Rock

Rock fibre soffit insulation

Integrity-120mins Thermal-upgrade

Description

A specially formulated high density mineral fibre slab laminated to a 6 mm square or bevelled edge impact resistant board that provides an aesthetically pleasing liner to concrete soffits.

It performs exceptionally well thermally and acoustically but above all provides a fire safe solution to building requirements.

Available with either square or bevelled edge on calcium silicate board only.

Benefits

  • œOdourless, durable and non-hydroscopic
  • œRot proof, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria

Firetherm Certifire logoASFP_Logo

Soffit Liner PIR

Soffit Liner PIR

Soffit Liner PIR

Thermally efficient, acoustic soffit liners

Thermal-upgrade

Description

A rigid polyisocyanurate foam with a range of facing options to suit project requirements.

Standard facings are Cemlux (calcium silicate), for class 0 and impact resistance. Aluminium foil for class 0 only. Other facing board available upon request.

Available with either square or bevelled edge on calcium silicate board only.

Benefits

  • œLightweightœ
  • Space saving

Firetherm Certifire logoASFP_Logo

Stonewool Slab

Stonewool Slab

Stonewool Slab

Acoustic and thermal rock fibre slabs

Description

Rock mineral wool slabs, available in a range of densities from 33 to 200 kg/m3. Standard products are supplied unfaced, but slabs can also be manufactured with a factory applied foil or tissue facing and are also available with a water repellent additive.

Manufactured to a Quality Assurance system which complies with BS EN ISO 9001: 2000.

Benefits

  • œOdourless, durable and non-hydroscopic
  • œRot proof, does not sustain verminand will not encourage the growth of fungi, mould or bacteria
  • œExcellent acoustic properties, up to 50 dB

Firetherm Certifire logoASFP_Logo

FB750 Intubatt

FB750 Intubatt

FB750 Intubatt

Batt for use within walls and floors

Insulation-240minsIntegrity-240minsOptifire-traceable

Description

FB750 Intubatt is a lightweight 4 hour fire barrier comprising of a rock mineral fibre board with an uniquely identifiable ablative coating, containing Optifire TM Technology. 

FB750 is designed to reinstate the fire performance of compartment walls and floors which have been breached by penetrating services, providing a fire, smoke, thermal, acoustic and air pressure seal. 

FB750 must be used in conjunction with FS702 Intumastic to be suitable for sealing around the following service types: non-combustible pipes, cable trays, ladders and baskets (perforated or non-perforated), armoured cables, data cables, HV cables, cable bundles up to 100 mm. 

FB750 can be used on flexible walls & rigid walls (100 mm or wider), rigid floors (150 mm or wider), and beneath raised access floors / suspended floors. 

When used with a Nullifire or Firetherm closer device (FS709 Intumastic HP, FP302 Intustrap, FP160 Intusleeve, FP170 Intucollar), FB750 Intubatt also becomes suitable for penetrating combustible pipes & conduits such as PVC, PE, PP, HDPE, PPR, PEX, Uponor and combustible ducting. 

FB750 has also been tested to fire protect the underside of loaded timber floors for up to 120 minutes (BS 476 Pt 21). 

Typical areas of use include: health and leisure facilities, schools, universities, commercial buildings, hospitals, retail and industrial units and nuclear power plants. 

 

 

Benefits

  • Up to 4 hours fire resistance – tested to EN 1366-3 (up to 2.16m2 opening) and to BS 476 Pt 20/22 tested (up to 7.2m2 opening with framework). 
  • Optifire TM unique traceability identifier 
  • Acoustic & smoke sealing 
  • Air pressure tested up to 2000 Pa 
  • Fully tested for up to 240 minutes integrity and insulation
  • Suitable for use in flexible & rigid walls, rigid floors and under timber floors 
  • Easy to cut 
  • Allows for thermal expansion of the services in ambiant conditions

Firetherm Certifire logoASFP_Logo